Bobrick B-6806X24 Concealed Mounting with 24" Snap Flange Grab Bars - Satin
B-6806X24 Bobrick Concealed Mounting with 24" Snap Flange Grab Bars - Satin
- Satin-finish 18-gauge type 304 stainless steel tubing 1-1/2" (38mm) diameter.
- Bar passes through flange and is heliarc welded to form single structural unit.
- Cover snaps over mounting flange to conceal screws.
- Concealed mounting flange 1/8" (3mm) thick stainless steel plate, 2" W x 3-1/8" H (50 x 80mm), with two screw holes for concealed anchors.
- Cover is 22-gauge (0.8mm) stainless steel with satin-finish, 3-1/4" (85mm) dia.
- Grab bars that provide 1-1/2" (38mm) clearance from the wall can support loads in excess of 900 pounds (408-kg) when properly installed.
- Meets ADA Accessibility Guidelines in U.S.A.
- All joints and supports are contour cut and welded.
- Concealed anchors and fasteners available as an optional accessory.
- Peened nonslip gripping surface available.