Faucet Depot

Tankless Water Heaters : Takagi Hot Water Heaters

Takagi Tankless Water Heaters

View the Tankless Water Heaters at FaucetDepot.com

How does a Takagi Tankless Water Heater work?

  1. A hot water tap is opened...
  2. The water enters the heater.
  3. A water flow sensor detects the water flow.
  4. The computer automatically ignites the burner.
  5. The water circulates through the heat exchanger (coil).
  6. The heat exchanger instantly heats the water
    at the designated temperature. (this takes only 5 seconds)
  7. The heater can provide you with endless hot water continuously.
    No more running out of hot water in the middle of a shower!
  8. When the hot water tap is turned off, the unit shuts down automatically.
How it works!!

Why Use a Tankless Water Heater?

Endless Hot Water: Since there is no tank to fill, there is no end to your supply of hot water. Depending on the model, Takagi Tankless water heaters deliver between 200 gallons and 500 gallons of hot water every hour on demand. Tankless systems guarantee that an endless supply of water is available to residences, commercial spaces or anywhere a constant source of hot water is needed.

Space-saving and Easy Installation: A standard FLASH water heater, taking up only 2.2 cubic feet of space and 60 pounds, is about the size of a suitcase. This allows for installation in spaces with limited area or even outdoors with no enclosures.

Money & Energy Savings: Since a tankless water heater has neither a storage tank to keep heated all day, nor a pilot light, it burns gas only when you need hot water. This eliminates standby heat loss, which can be as high as 3-4% every hour for storage tank type water heaters. This higher efficiency can allow you to save up to 50% off your utility costs.

High Quality (no more tank leaks): The Takagi Tankless Water Heater is made using the best quality material for durability and long life, unlike storage tanks which are designed to eventually rust and be thrown away. The Takagi tankless system uses all copper and brass water ways, stainless steel burners, a rust resistant baked polyurethane finish, and even has pipe freezing protection.

Enviromentally Friendly: The Takagi Tankless Water Heater is the only product of its kind to receive SCAQMD (Southern California Air Quality Management District) approval for it's low emissions (CO, Nox) With high thermal efficiency, Takagi systems use much less fuel than traditional systems.

Many Applications: Space Heating, Floor Heating, Re-circulation System, Large Volume (such as hotels, apartments or industrial plants) and more.


View the Tankless Water Heaters at FaucetDepot.com

Mobius T-M1

At just twenty inches high, and weighing only fourty pounds, the T-K Jr. is the most compact unit in the Takagi line. Designed to produce endless hot water and radiant heating for smaller homes, The T-K Jr. uses the same innovative technology as the original Takagi units - only on an even smaller scale. A unique feature of the MOBIUS T-M1 is its flexibility in large use applications such as big homes, hotels and motels, apartments and other commercial structures. Up to 20 units can be linked together using a single main control system. When installed in this manner, MOBIUS units can replace the space consuming, inefficient boilers used in most large buildings. Further, the use of MOBIUS units allows the building owners to customize the water heating system by using the correct number of units to meet the building's hot water needs. When you are using a MOBIUS multi-system, you don't have to burn a million BTU for one application - just burn as much as you need.
Flash T-K Jr.
Mobius T-M1

Technical Specifications

Natural Gas Input Min. 19,500 Btu Max. 140,000 Btu
LPG Input Min. 17,000 Btu Max. 140,000 Btu
Gas Connection 3/4" NPT  
Water Connections 3/4" NPT  
Water Pressure Min. 15 psi Max. 150 psi
Natural Gas Pressure Inlet Min. 5" WC Max.10.5" WC
LP Gas Pressure Inlet Min. 11" WC Max. 14" WC
Manifold Pressure Natural 2.8" WC Propane 3.2" WC
Weight 30 lbs.  
Dimensions 20" x 14" x 6"  
Ignition Electronic Ignition  
Electrical Supply AC 120 V  

Technical Specifications

Natural Gas Input Min. 25,000 Btu Max. 235,000 Btu
LPG Input Min. 25,000 Btu Max. 225,000 Btu
Gas Connection 3/4" NPT  
Water Connections 3/4" NPT  
Water Pressure Min. 15 psi Max. 150 psi
Natural Gas Pressure Inlet Min. 5" WC Max. 10.5" WC
LP Gas Pressure Inlet Min. 11" WC Max. 14" WC
Manifold Pressure Natural 2.2" WC Propane 2.7" WC
Weight 70 lbs.  
Dimensions 24" x 18" x 9"  



Toll Free
(888) 328-2389

  Live chat by LivePerson

BizRate Customer Certified (GOLD) Site

Read Your Store Reviews

BBB Logo

Thank you for shopping with FaucetDepot.com!