Ships within 2 - 3 days from our warehouse.
UPC: 648714410267Finish: None
The M-101526-F31 Flushmate System is a complete pressure-assist flush system for 503 series tanks. It fits all porcelain manufacturers EXCEPT Kohler tank 4404 and 10” rough-in fixtures.
The M-101526-F31 Flushmate System includes:
It DOES NOT fit 10” rough-in tanks, only 12” rough-in tanks. (“Rough-in” refers to the distance from the wall to the bolts at the center of the drain.)
Flushmate vessels and components do not retrofit into gravity type toilets. They are only used with Flushmate-equipped toilets.
I have Kholer toilets throughout my home(5). These units require maintenance. I am not sure Kholer deserves their lofty reputation as the flush mate components have required changing too many times.
I purchased two of these items and neither came with the rod kits as shown in the picture. I bought one on these from Faucet Depot a couple of years ago and it was included. If I had known they were not included now, I could have purchased them with the Flushmate systems all at one time.
I was afraid something would be missing when I ordered this, but it's a complete slide-in replacement. Just a simple adjustment to the cartridge actuator and you're done. I would recommend getting the wrench to remove the three inch plastic nut at the base of the tank.
Instructions are complete, easy-to-follow, direct. 30 minutes: need an old towel, 13mm socket, 15mm deep socket (or wrench), flat screwdriver, adjustable pliers. Comes with other tools. This unit works so much better than the original "PF/2 Energizer Mod 150-403" that came with the Eljer toilet, it's worth replacing the original with this contraption even if you don't need to. FaucetDepot had the best price and delivery.