Zoeller® Submersible Pump, Series: Waste-Mate 260, 128 gpm, 2 or 3 in NPT Outlet, 21-1/2 ft Maximum Head, 1/2 hp, 115 VAC, 10.4 A, 60 Hz Frequency, 1 ph ph, 1750 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Sleeve Bearing, Cast Iron, 14-5/16 in H Dimensions
Amperage Rating : 5.5 ABearing Type : SleeveColor : GreenCord Type : 3-Wire NeopreneDimensions : 14-5/16 in HEnclosure Type : Auto Reset Thermal OverloadFlow Rate : 128 gpmFrequency Rating : 60 HzHorsepower : 1/2 hpImpeller Type : Non-Clogging VortexMaterial : Cast IronMaximum Head : 21-1/2 ftMotor Speed : 1750 rpmOutlet Size : 2 or 3 in NPTPhase : 1 phSeries : Waste-Mate 260Temperature Rating : 130 deg FType : AutomaticVoltage Rating : 230 VAC
Float operated 2-pole mechanical switchDurable cast construction, ASTM Class 25 cast iron switch case and pump housingNon-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)Not affected by materials normally found in drainage and sewage pumpsStainless steel screws, bolts, handle, guard, arm and seal assemblyNeoprene square ring and gasketOil filled, hermetically sealed motorsOil-lubricated bearingsCarbon and ceramic shaft sealCorrosion-resistant, powder coated epoxy finishCompletely submersibleWatertight and dust-tightAutomatic reset thermal overload protection (1 ph only)12 in on point, 4 in off pointHigh water alarms available10 in auto/15 in non auto, 3-wire neoprene cord and plugCap/motor housing/pump housing cast iron, base cast iron or engineered plasticUpper and lower sleeve bearingEngineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasketSubmersible sewage/effluent or dewatering pump
