Zoeller® Submersible Sewage Pump, 1-Seal High-Head, Series: Waste-Mate 290, 135 gpm, 2 or 3 in FNPT Outlet, 40 ft Maximum Head, 1/2 hp, 115 VAC, 15 A, 60 Hz Frequency, 1 ph ph, 3450 rpm Motor, 3-Wire Neoprene Cord, Non-Clogging Vortex Impeller, 130 deg F, Ball Bearing, Cast Iron, 19-5/16 in H x 12-7/8 in W Dimensions
Amperage Rating : 15 ABearing Type : BallCord Type : 3-Wire NeopreneDimensions : 19-5/16 in H x 12-7/8 in WFlow Rate : 135 gpmFrequency Rating : 60 HzHorsepower : 1/2 hpImpeller Type : Non-Clogging VortexMaterial : Cast IronMaximum Head : 40 ftMotor Speed : 3450 rpmOutlet Size : 2 or 3 in FNPTPhase : 1 phSeries : Waste-Mate 290Temperature Rating : 130 deg FType : 1-Seal High-HeadVoltage Rating : 115 VAC
Durable, cast iron constructed switch case, base, motor and pump housingNo sheet metal parts to rust or corrodeAll cast iron class 30 30000 lb tensile strengthStainless steel screws, bolts, float rod, handle, guard, arm and seal assemblyOil filled, hermetically-sealed, automatic reset thermal overload protected (1 ph only) motorShaft seal - stainless steel carbon and ceramic rotary1117 carbon steel motor shaft (single seal models)Corrosion-resistant, powder coated epoxy finishUpper and lower ball bearing running in bath of oilNeoprene square ring and gasketAll models pass 2 in spherical solidsOn point: 15-3/4 in, off point: 5-1/4 in100% computerized tested20 ft L cordAutomatic operationPermanent split capacitor or 3 ph motorClass B insulation
