Zoeller® Effluent/Dewatering Submersible Pump, Automatic, Series: Flow-Mate M98, 73 gpm, 1-1/2 in Outlet, 23 ft Maximum Head, 1/2 hp, 115/230 VAC, 9.4 A, 60 Hz, 1 ph, 1725 rpm Motor, Non-Clogging Vortex Impeller, 130 deg F, Oil Fed Bearing, Cast Iron, 12-1/16 in H x 10-1/8 in W
Float operated 2-pole mechanical switchCorrosion-resistant, powder coated epoxy finishNo sheet metal parts to rust or corrodeStainless steel screws, guard, handle, arm and seal assemblyNo screens to clog, all castings are cast iron class 25 to 30 25000 tensile strength, watertight, neoprene square ring between motor and pump housingPermanent split capacitor motor, oil filled and hermetically-sealed, automatic reset thermal overload protectionWatertight neoprene square ring between motor and pump housingCast iron switch case, motor, pump housing and base, bearings, upper and lower oil fed cast iron, carbon and ceramic shaft sealEntire unit pressure-tested after assemblyClass B insulation, 9-1/2 in/3 in auto On/Off points1/2 in spherical solid handling, 15 ft cord, oil filled coolingAuto reset thermal overload motor protectionCast iron cap, motor and pump housing, base, carbon and ceramic mechanical seals, engineered plastic impeller, stainless steel hardware, neoprene gasketAISI 1215 cold roll steel motor shaft1-1/2 in NPT discharge