Our Best Seller in sewage pumps, the fully automatic Model M267 Sewage Pump is designed to remove raw sewage and wastewater in sewage ejector applications. The professional-grade, 1/2 HP M267 is a time-tested and reliable sewage pump. Known as the "Waste-Mate," the M267 is a fully automatic float-operated sewage pump. The white polypropylene float is solid so it cannot become waterlogged. This ensures that it is always buoyant and able to turn the pump on when necessary. The pump's vortex impeller allows it to pass 2" spherical solids. The impeller's clearance in relation to the pump housing allows water and solids to pass freely through the pump. This combination of design features lessens the chance of clogging and downtime. The Model 267's switch case, motor housing, pump housing, and base are each constructed of cast iron. The pump's identification tag, float guard, handle, switch arm, and hardware are made of non-corrodible stainless steel. This attention to detail ensures that the Model 267 is able to withstand the most demanding sewage ejector applications. Every pump is submerged in water and tested to its published performance curve, ensuring it meets your expectations and delivers peace of mind right-out-of-the-box.

Amperage Rating     :     10.4 ABearing Type     :     SleeveCord Type     :     3-Wire NeopreneDimensions     :     14-5/16 in HFlow Rate     :     128 gpmFrequency Rating     :     60 HzHorsepower     :     1/2 hpImpeller Type     :     Non-Clogging VortexMaterial     :     Cast IronMaximum Head     :     21-1/2 ftMotor Speed     :     1750 rpmOutlet Size     :     2 or 3 in NPTPhase     :     1Series     :     Waste-Mate 260Temperature Rating     :     130 deg FVoltage Rating     :     115 VAC

Float operated 2-pole mechanical switch

Durable cast construction, ASTM Class 25 cast iron switch case and pump housing

Non-clogging vortex impeller design, engineered plastic impeller with metal inserts (1 ph)

Not affected by materials normally found in drainage and sewage pumps

Stainless steel screws, bolts, handle, guard, arm and seal assembly

Neoprene square ring and gasket

Oil filled, hermetically sealed motors

Oil-lubricated bearings

Carbon and ceramic shaft seal

Corrosion-resistant, powder coated epoxy finish

Completely submersible

Watertight and dust-tight

Automatic reset thermal overload protection (1 ph only)

12 in on point, 4 in off point

High water alarms available

10 in auto/15 in non auto, 3-wire neoprene cord and plug

Cap/motor housing/pump housing cast iron, base cast iron or engineered plastic

Upper and lower sleeve bearing

Engineered plastic with metal insert impeller, Stainless steel hardware, AISI 1215 cold rolled steel motor shaft, Neoprene gasket

Submersible sewage/effluent or dewatering pump